Rider Weight Sodikart
Keep in mind that the weight of many Sodikarts can vary, thus the weight of the rider permitted can also vary to meet that need …. but to give you an example, here is one : Sodi kart LR5 - SODIKART
Now let us have a look at this one a whole lot more closely, and hopefully, you can at least pick up on a few things. Sounds good? Well, what are we waiting for, then? It’s time to get into this topic ….
First of all, I would like you to well bear in mind that the full weight in dimensions for this Sodikart are listed as follows :
- Length (L) = 1850 mm
- Width (l) = 1270 mm
- Height (H) = 590 mm
- Height with roll-over bar (H1) = 890 mm
- Height with roll-over bar (H2) = 1072 mm
- Weight (GX160) = 124 kg
- Weight (GX200) = 124.5 kg
You will need to factor in mind the specific model you have ( for instance, is it a GX 160, a GX 200 - 300, etc? ) in order to best tailor to planning on the right weight. Now, if it is a single – rider or single – driver tandem sort of Sodikart, or even one that allows for two people inside it at all times, is another factor that you will need to approach. Most of these dual types of go karts can accommodate total weights of about 400 lbs, give or take a bit ( based on the specified model, once again, as well as any additional weight inside the vehicle, like items you are holding in there, back loads or cargo ) . It is important to divide the overall rider weight by the number of riders, as well …. for instance, if the overall weight allowed inside the vehicle, per its instructions and manufacturer guidelines, is 450 lbs ( just to give an example, at random, he he he he heh ) , then that means that either each of you should weigh 225 lbs or less… OR 450 lbs total ( with both of your weights added up into a sum … makes simple sense, right? ) .
If you want further, up to date data on this, then have a look online at the official CIK - FIA weight limit recommendations per go kart / Sodikart model of choice. You’ll get a better idea. As always, thanks again for reading the bit of insight I had to give.